论文
当前位置: 首页 > 承担项目 > 论文

翁卫兵,房殿军,李强,曹淼龙,吴坚.冷藏运输车厢温度场均匀控制研究[J].农业机械学报,2014,45(1):228-235.

翁卫兵,吴坚.机械冷藏车远程可视化全况监控系统的设计与实现[J].物流技术,2014,33(1):314-317.

翁卫兵,邵举平.多重不确定环境下战略联盟供应链物流计划优化[J].机械工程学报,2014(4):192-202.

翁卫兵,房殿军,李强,曹淼龙,吴坚,徐兴.冷藏运输厢内流场和温度场协同控制[J].农业机械学报, 2014, 45(6): 260-265,290.

王焕平、 马红萍: Sintering behavior and dielectric properties of Al2O3 ceramics with CaMgSi2O6 addition. Journal of the Cersmic of Japan. 2012,120(7):268-271

方一航、杨清华、李宏伟、王焕平、马红萍: Li2CO3改性CBS/Al2O3玻璃-陶瓷的性能. 材料研究学报. 2012,29(5):515-520

梁晓娟、李西秦、黎苏、杨礼康: 定容燃烧过程中苯与芳香烃排放规律. 长安大学学报(自然科学版). 2012,3(5):107-110点击打开链接

茅辛薇、吴瑞明、平观林: 小型家用发电机装置设计. 科技创新导报. 2012,(20):21

平观林、吴瑞明: 可支撑式折叠侧轮的救援机器人设计. 机械设计. 2012,(29):185-186

吴瑞明: 卓越工程师培养计划校企合作实践教学探索. 第十三届全国机械设计教学研讨会议.2012,(29):302-304

沙毅、侯丽艳: 叶片厚度对轴流泵性能影响及内部流场分析. 农业工程学报. 2012,28(18):75-81

沙毅、侯丽艳: 基于CFD的潜水轴流泵性能分析及其特性试验. 农业工程学报. 2012,28(22):51-57

郑军: Study on the organization model for the design process modular of complex mechanical product. Advanced Materials Research. 2012,2990-2994

李西秦、黎苏、刘冰: 无铅汽油在定容燃烧过程中苯排放的试验研究. 小型内燃机与摩托车. 2012,41(3):89-92

高良凤:机械零部件性能试验实验课程的实践与探索. 中国现代教育装备. 2012,23:50-52

杨华文、杨礼康、段福斌: 案例教学在机械设计课程中应用的思考. 机械设计教学研究. 2012

杨华文、杨礼康、段福斌: 安例教学在机械原理课程教学中应用的探索. 浙江理工大学学报. 2012,29(增刊):40-42

刘鹄然: 高阶密切滚动轴承. 浙江科技学院学报. 2012,24(4):294-

刘鹄然: 偏摆减速器内锥齿轮加工. 浙江科技学院学报. 2012,24(6):390-

刘鹄然: the test of the transmission properties of the swinging planetary reducer. 布加勒斯特建筑技术学院学报. 2012,18(2):12-

徐爱群: The Factors Influcing Energy Transfer Efficiency of Micro- Actuator. Applied Mechanics and Materials. 2012,197: 808-813

徐爱群、段福斌: 机械原理项目教学模式探索. 浙江理工大学学报. 2012,29:26-29

朱勇建、潘卫清、李安虎、职亚楠: "Selection of phase-recovery algorithms for fringe processing in  optical measurement of micro-surface". SPIE.2012,8493:84931B-1-7

李安虎、王伟、丁叶、梁永成、孙建锋、朱勇建: "An overview of radial supporting ways for large-size movement mirror: a case study of a large-aperture rotating prism". SPIE. 2012,8487:84870T-1-11

李强、刘淑莲、潘晓弘、郑水英: 非线性转子-轴承耦合系统润滑及稳定性分析. 浙江大学学报工学版. 2012,46(10):1729-1736

李强、于桂昌、刘淑莲、郑水英: Application of computational fluid dynamic and fluid structure interaction for calculating the 3D transient flow of journal bearings coupled with rotor system. CHINESE JOURNAL OF MECHANICAL ENGINEERING. 2012,25(5):926-932

王瑞金、李志华: INFLUENCE ON DROPLET FORMATION IN THE PRESENCE OF NANOPARTICLES IN A MICROFLUIDIC T-JUNCTION". THERMAL SCIENCE. 2012, 16(5):1529-1532

庞茂、吴瑞明、杨礼康: 落锤式油压缓冲器性能试验台开发及应用. 机床与液压. 2012,40(16):87-89
李其朋、李威、丁凡、满军: A Novel Design for an Electromagnetic Valve Actuator for High Pressure Application. Smart Materials and Structures. 2012,21(10):107001

陈增泉、陈宁:Soft start-up smoothness of Hydro-viscous drive (HVD) set for heavy-duty motor.Procedia Engineering(Proceedings of PEEA 2011).2011,12:799-803

陈增泉、陈宁:Effects of lubricant oils on the Hydro-viscous Drive set working performance.Procedia Engineering(Proceedings of PEEA 2011).2011,12:813-816

 马红萍:Spectroscopy and crystal-field analysis of Cr4+-doped transparent silicate glass-ceramics.Journal of Non-Crystalline Solids.2011,357(11):2294-2297.

王焕平 、马红萍:effects of Al2O3 addition on the sintering behavior and microwave dielectric properties of CaSiO3 ceramics.Journal of the European Ceramic Society.2012,32(3)541-545

崔志广 、马红萍:Synthesis and luminescence properties of glass ceramics containing MSiO3:Eu2+ phosphors for white LED.Journal of Luminescence.2012,132(1)153-160

崔志广 、马红萍:Eu2+/Dy3+共掺SrSiO3透明微晶玻璃的光学性能.光学学报2011,4 (4-5): 1602-1606

陈宁:Response swiftness of electro-hydraulic actuator for heavy-duty vehicle engine.Advanced Science Letters.2011,4 (4-5): 1602-1606

陈宁:Soft start-up steadiness of hydro-viscous drive set for large belt conveyor.Advanced Science Letters.2011,4 (8-10): 2595-2598

陈宁: Multi-sources traffic data fusion method based on evidence theory combining with fuzzy rough sets.Sensor Letters.2011,9 (5): 2030-2033

董红召、徐勇斌、陈宁:城市交通中机动车尾气排放与扩散特性的研究.内燃机工程.2011,32 (2): 12-16

董红召,陈炜峰,陈宁,郭明飞:车路集成环境下车辆防撞预警安全状态判别模型的研究.汽车工程.2011,33 (9): 777-781

董红召、徐勇斌、陈宁:基于IVE模型的杭州市机动车实际行驶工况下排放因子的研究.汽车工程.2011,33 (12): 1034-1038

黄智、陈宁、董红召:BRT综合评价体系的关联规则挖掘分析.公路工程.2011,36 (4): 22-25

凌玮:NC Machining Process and Simulation of G31-1878 Case Body.American Journal of Engineer and Technology Research.2011,11(12):2090-2093

沙毅:旋流泵性能及内部流场试验分析.农业工程学报.2011,27(4):141-146

沙毅、宋德玉、段福斌、喻彩丽、曹淼龙:轴流泵变转速性能试验及内部流场数值计算.机械工程学报.2012,48(6):187-192

喻彩丽、段福斌、祝帮文:Systematic Design of Practical Teaching—Exploring a Mode of Nurturing Excellent Engineers.Information Technology and Education Teaching.2011,1:137-140

喻彩丽:Germany’s FH Practical Teaching Mode and the Inspirations.The Intenational Studies Symposium on Theory and Practice in Higher Education.2012,1:23-26

徐兴、李仁旺、吴新丽、赵芸:基于网络质量控制的复杂供应链网络稳健性研究.中国机械工程.2012,23(8):941-946

徐兴、李仁旺、吴新丽、赵芸:面向供应链协同的供应商选择模型的研究.浙江工业大学学报.2011,39(5):550-554

徐兴、李仁旺、吴新丽、赵芸:基于可拓学的汽车产业供应链优化方法分析.机械设计与制造.2012,(1):109-111

徐兴、李仁旺、吴新丽、赵芸:基于改进型QFD和正交试验混合方法的供应商选择鲁棒性研究.现代制造工程.2011,(8):62-66

徐兴、李仁旺、吴新丽:Study on Supplier Selection Model for Supply Chain Collaboration.2011 International Conference on Intelligent Systems and Knowledge Engineering.2011,241–246

李安虎、李志忠、王伟、朱勇建、江旭春:A novel laser tracking testbed for robot trajectory errors.Proc. of SPIE.2011,Vol. 8133 81330S-1-7

侯培培、职亚楠、孙建峰、周煜、朱勇建、刘立人:Maximum fixing efficiency of thermal fixing by optimal switching in LiNbO3:Fe crystal.Proc. of SPIE.2011,Vol. 8120 812010-1-9

吴瑞明、 姜文彪、 张志义:基于GE智能平台大学计划的卓越工程师教育实践教学.科技创新导报.2011(36): 120,122

蒋志峰、 吴瑞明:超声表面波检测的局部频域特征分析方法初探.科技通报. 2011,27(4)  :571-574

李西秦、蔡仁华、曹淼龙、刘冰:汽油多环芳香烃排放的试验研究.汽车技术.2011,(8):51-54

李西秦、王瑞金、刘冰:Synchronous Measuring Device and Its Operating Method for Air Fuel Ratio of CNG Engines.International Conference,CSEE2011.2011:113-118

李西秦、蔡素燕、刘冰、何学群:Study on emission control of CNG engine based on D-S evidence theory.Applied Mechanics and Materials.2012,Vol.109:281-284

李西秦:Researches on Relationship between Dynamic Radius and Slip Ratio of Driving Wheel.Applied Mechanics and Materials.2012,Vol.159:249-252

刘淑莲、郑水英:改进式被动电磁阻尼器及其应用.振动与冲击.2011,30(9):94-97

李强、刘淑莲、潘晓弘、郑水英:A new method for studying the 3D transient flow of misaligned journal bearings in flexible rotor-bearing systems.Journal of zhejiang university-science A(applied physics&engineering) .2012,13(4):293-310

于桂昌、刘淑莲、郑水英:CFD在转子-轴承分析中的应用-双油槽滑动轴承.工程热物理学报.2012,32(s):110-113

于桂昌、刘淑莲、郑水英:扰动情况下双油槽圆形轴瓦滑动轴承性能分析.扰动情况下双油槽圆形轴瓦滑动轴承性能分析.2012,31(5):46-49

罗挺、刘淑莲、郑水英:弯曲转子系统的模态动平衡方法研究.机床与液压.2012,40(3):5-7

王移风、张恒、曹衍龙、杨将新:Concurrent Tolerance Design System based on Manufacturing Context.Advanced Materials Research.2012,Vol.421:634-639 

王移风 曹衍龙 徐旭松 杨将新:基于SDT的三维公差域建模方法研究.中国机械工程.2012,vol23(7):844-846

刘运通、唐任仲、郑军:基于模块化方法的产品设计知识组织模型.浙江大学学报(工学版).2011,45(11)1900-1907

楼少敏、朱彦、俞晓群:基于计算机视觉的织物疵点检测技术研究进展.丝绸.2011,48(6):17-21

梁晓娟、张硕:模糊PID控制的助力模式对操纵稳定性影响分析.武汉理工大学学报.2012,34(3):128-131

梁晓娟、李西秦:research on emissions of benzene & polycyclic aromatic hydrocarbons in constant volume combustion bomb .advanced materials research.2012,2993-2997

徐进:B-spline curves extension with ordered points constraint.Advanced Materials and Processes.2011,311-313:1439-1445

刘鹄然、楼易、张力:A new kind of numerical control method. Procedia Engineering .2011,15:720-725

刘鹄然:The realization of the “SFM” and “HFM” method on the CNC hypoid cutting machine. Procedia Engineering . 2011,15:729-732

刘鹄然:The substitution of the curve with circle in the NC interpolation in the machining of guide pulley.  Procedia Engineering . 2011,15:725-729

刘鹄然:The Grinding Revision Of The Diamond Grinder Of The Carbide Scraping Hob.Materials Science Forum ,icfnst2011.2011,694 :919-922

刘鹄然:The Thermal Stress between The Interfaces Of Different Materials Of The Axis Symmetric Structural,Materials Science Forum ,icfnst2011.2011,694 : 518-522

刘鹄然:The New Method In Scraping The Back Off Surface Of Side Edge Of The Carbide Hob.Materials Science Forum .2011, 694: 754-759

刘鹄然:The Profile Calculation and the Best Fillet of   Powder Metallurgical Gears.Materials Science Forum ,icfnst2011.2011,694: 851-854

刘鹄然:The Simple Method In Grinding The Carbide Burs Of The Shape Of a Cone Upside Down .The Simple Method In Grinding The Carbide Burs Of The Shape Of a Cone Upside Down .2011,694 : 923-927   

刘鹄然:An Introduction To The New Kind Hydraulic Motor - Development And History.Applied Mechanics and Materialsicrtmme2011.2011, 55-57: 2210-2213

刘鹄然:The Force Analysis Of The Planet Swinging Bevel Gear And Skew Sh.Applied Mechanics and Materialsicrtmme2011 ,2011,55-57 :2214-2217

刘鹄然:GUCHTYAR Method to Determine the Base Circle Radius of Cams.Applied Mechanics and Materials ,icrtmme2011.2011, 55-57:2218-2223

刘鹄然:The Worm Transmission With Inconstant Addendum.Applied Mechanics and Materials ,icrtmme.2011,55-57:2224-2228  

刘鹄然:The Design Of The Fly Wheel Of The Shaper Machine Tool According To The Maximum And Minimum Angular Velocity.Applied Mechanics and Materials, icrtmme2011.2011, 55-57  2229-2234.

张俊、梁晓娟:浙江省高速公路收费站计重收费土建改造设计体会.交通建设与管理.2012,05(360):96-97

张立、祝邦文、王名科:高空作业车油缸活塞杠热处理工艺研究.专用汽车.2011,10:68.

李其朋,丁凡,陈兴达:Design and Analysis of a Linear Disc-Type Electromagnetic Actuator.Advanced Science Letters.2011,6-7,2503-2507

满军,丁凡,李其朋,笪靖,邵森寅:永磁屏蔽式耐高压高速开关电磁铁.浙江大学学报(工学版).2012,46(2):309-314